Graphtec Craft Robo CC330-20 Technical Specifications

[admin]

Please find below the technical specifications for the new Craft Robo CC330-20 cutting machine from Graphtec.

Specification:
Media transport:	Grit Rolling
Drive:	Stepping Motor
Maximum cutting range:	200mm X 1000mm
Effective sheet width:	A4 Size Supported, Maximum 270mm
Maximum cutting speed:	10 to 100mm/s (10mm/s step, 10 steps)
Cutting Force:	230gf
Mechanical Resolution:	0.05mm
Programmable Resolution:	0.05mm
Registration mark reading:	Automatic
No. of pens mountable:	1
Tools (cutter /pen types):	Dedicated cutter plunger/ Super steel cutter blade
	Universal ball point pen plunger (available as an accessory)
Compatible media:	Film media: 0.1mm or less in thickness (excluding high intensity refrective sheets)
	Kent paper up to 157 g/m2
	Drawing paper, Postcards, Scrapbooking paper, Inkjet Photo paper
Interfaces:	USB 2.0 (Full speed)
SD Card:	Reading only, Max 2GB
	(SDHC is not compatible)
Display panel:	LCD: 8 characters X 2 lines
Rated power supply:	AC adapter 24VDC (1.25A)
Power consumption:	12W
Working environment:	10 to 35 deg. C, 35 to 70 % R.H. (non-condensing)
Guaranteed operating environment:	16 to 32 deg. C, 35 to 70 % R.H. (non-condensing)
External dimensions (W X D X H):	Approx. 420mm x 140mm x 112mm (excluding protrusions)
Weight:	Approx. 2kg
Corresponding operating systems:	Windows XP / 2000 /Vista, MacOS 10.X

Standard accessories

• AC adapter
• Power cable
• USB cable
• Craft ROBO Software Package CD-ROM
• Set-up Manual
• Quick Application Guide
• Carrier Sheet (CR09308E)
• Cutter Plunger (with blade tip adjustment cap*)

* One each of blade adjustment cap (Blue, Yellow, Red) are attached with the cutter plunger

<< Back to Craft Robo CC330-20